John Deere Tractor Repair Manual Series 850, 950, 1050

The John Deere Tractor Repair Manual Series 850, 950, 1050 covers tractor models indicated. If you're looking for a John Deere 950 manual or John Deere 1050 service manual, this is the book you want.

Note: this tractor repair manual does NOT include wiring diagrams.

Book Excerpt: John Deere Tractor Repair Manual Series 850, 950, 1050

RANGE SHIFTER ASSEMBLY (ALL MODELS)

134. The range shifter assembly should only be removed if shift parts are damaged and must be removed or if the hi-lo sliding gear (75-Fig. 130 or Fig. 131) must be renewed.

Differential pinion shaft and other parts can be removed and reinstalled with range gear and shift parts in place. Installation of detent assembly (83-Fig. 132) is very difficult and necessitates removal of final drive assembly.

To remove, first refer to the paragraph 130 or 131 and remove transmission top shaft and paragraph 150 to remove right final drive.

Remove pin (88-Fig. 132) and lever (89). Unbolt and remove plate (87) and "O" ring (86), then withdraw arm shaft (85).

Slide gear (75) forward, then drive pin (82) down and catch from falling using "J" shaped wire inserted in pin from bottom.

Drive shaft (84) forward out of fork (80) and case bore.

As shaft moves forward, detent ball and spring (83) will fall free. Ball may fall either into differential compartment or transmission compartment.

Refer to paragraph 131 for removal and installation of differential drive shaft if gear (75) is to be renewed.

Subject: John Deere farm tractor service, maintenance, repair. ISBN-10: 0872884309 | ISBN-13: 9780872884304